The sole purpose of honey extractors as the name implies, is to remove honey from the spines without damaging or eliminating the honey combs as they be reused. They will are mechanical devices used for honey extraction soon after the honey has been harvested.
They have a drum where the honey comb is put and then this carol spins at such high speeds that the baby flings out of the combs leaving the brush without honey while remains intact inside the removal chamber. In a nutshell centrifugal force is applied for the effective use of this device.
Just before the honey is put in the extraction holding chamber for extraction it must be uncapped first, there are many tools that can be used for uncapping the cells, and all of place be bought from most beekeeping equipment suppliers. You can either use manual uncapping knives or forks but some beekeepers prefer to use electric powered knives to uncap the combs.
All the taken honey collects at the bottom of the removal chamber and most extractors have a tap at the bottom, where the collected can be cleared out or honey heels can be used to remove honey from the removal chamber.
There are several types of Electric honey extractors available depending on use and amount of combs you might plan to extract honey from. These include the tangential and radial extractors and they differ how the frames are located in the extractor's basket. In the redial extractor the frames are usually located with the top facing outwards and compared to the tangential extractors only the one side of the frames faces outwards & redial types are commonly used in commercial honey extraction.
Redial types require less amount of work compared to tangential extractors, because the darling combs don't need to be turned over to extract all of the honey in the spines. Best honey extractor come in different sizes with regards to the intended use, for commercial use larger extractors are being used for they can maintain hundreds of frames at one time allowing for gallons of honey to be extracted. But someone starting out in beekeeping will look to use a tiny size extractor that holds 3 to 4 frames at a time.
A good small-scale financial institution can cost a few hundred bucks, but if you don't have this yet, you can still choose an own and there are great ideas available for you on the net which you can explore. I wouldn't worry too much about the price tag on an extractor as they are reasonable priced by most beekeeping supplies.
After the removal process is complete, you want to keep your honey is free of fragments from dead bees like legs, wings and other items. The best way to go about this is to filter your honey using at least a 400 or six hundred micron filter, they can be reasonably bought for ten dollars or less and most filters have adjustable heads that can fit most bucket steps up to a five gallon bucket. These filter systems can be washed and sterilized and they are re-usable.
In conclusion Allow me inform you that beekeeping standards for health are incredibly high so always keep your place of extraction spotless and tiniest seed free. Whoever works with honey must always be wearing a hairnet, clean clothes and the various tools and equipment must be cleaned and sterilized frequently.