Keep and Share logo     Log In  |  Mobile View  |  Help  
 
Visiting
 
Select a Color
   
 
How to maximize the benefits of your anti-workwear

Creation date: Oct 10, 2022 11:28am     Last modified date: Oct 10, 2022 11:28am   Last visit date: Mar 22, 2024 5:54pm
1 / 20 posts
Oct 10, 2022  ( 1 post )  
10/10/2022
11:28am
Santo SEo (seosanto7)

It is not enough to wear your protective equipment and go straight to work. You need to prepare yourself physically and mentally to be safe during the operation. More importantly, you need to prepare the anti-workwear you will use to maximize its protective effects. Here are the ways:



photo

Be specific with the size

 

Make sure the work clothes you use to fit you or your employees perfectly. Too tight and the workwear will restrict the wearer's mobility. As a result, performance will be greatly reduced or worse accidents may occur due to worker immobility.

 

If the work clothes are too loose, there is a possibility of foreign objects getting inside the work clothes. The person will then have to waste time selecting the item. Loose work clothes can hang during the operation and can cause serious injuries.

 

Clean them before use

 

There are certain types of work clothes that can be washed over and over again. For example, masks protect users from inhaling chemicals and small particles. Prolonged use of this personal protective equipment can cause accumulation and adhesion of chemicals and small particles that protect the wearer from inhalation. Without thorough washing, the worker will inhale a smelly chemical or have a constantly irritated nose from tiny particles. For maximum protection, it is recommended that work clothes, especially washable ones, be cleaned as often as needed.

 

If necessary, replace the replaceable parts

 

Some work clothes have replaceable parts. Manufacturers have done this so that the work clothes can be used repeatedly while maintaining the functionality of the equipment. Respirator masks have replaceable cartridges in them. After the recommended time, the cartridge must be replaced to remove chemicals and other odorous particles.

 

Repair damaged parts

 

As a result of wear and tear, many parts of work clothes are damaged. It would be very unwise to continue to wear these protective devices without repairing the damaged parts. Think about it, all the parts are there for a reason. And if you think that any anti-workwear can still be used with one integral part of it destroyed, then you have a big problem. The straps of helmets or the zipper of other work clothes are normally destroyed very often.

 

photo

It takes a very short time to repair these parts, but the guarantee that no failure can occur during operation more than makes up for the effort of repairing them. Therefore, you should establish a schedule for inspecting all your work clothes and repairing them immediately after discovering the damage.


Buying only the best anti-workwear from the best manufacturer guarantees optimal protection for you and your employees. However, once you have the workwear in your possession, it is up to you how you can maximize the protection that each piece of workwear can provide. For more information see this link: anti-workwear