Keep and Share logo     Log In  |  Mobile View  |  Help  
Select a Color
Ag Mill Liners: Key Considerations When Choosing A Mill-Lining Method
ball mill

Grinding mills are generation critical gear, and continuously grinding crushed ore to purge precious metals beforehand of this immersion practice.


The design settings and ongoing optimization of mill lining systems is extremely influential in the effective grinding of material ahead of extraction. When choosing a mill liner method, a few important considerations must be taken into account.


You can find a lot of types of mill designs including autogenous, semi-autogenous, ball, pole and scrubber mills. This information will check with this two most common forms: Semi-autogenous (SAG) and ball mills.


Vital considerations when picking mill liners


Several facets must be taken into account whenever choosing mining mill liners design, for example mandatory grinding action, mill size along with ore along with grinding websites characteristics, among some others. These concerns can help decide the very optimal/optimally liner material and geometry. Based upon the mill dimensions and content being earth, a lining system might be constructed from either rubber or mix, using cast metallic alloy inserts moulded in the liners at have on critical spots. In large-diameter SAG mills, as an instance, higher energy impacts could require using abrasion-resistant hardened plate inserts. The important thing is always to select the acceptable lining cloth for your own planned application.


Variety of milling process and operational parameters


SAG and ball mills grind stuff during different actions and usually are applied in different levels of this procedure. SAG mills typically possess a bigger diameter than length and are used to cut back big feed dimension ore (an average of ~300mm) right down to ~3mm, often for further grinding in a secondary practice.


Ball mills are somewhat smaller in diameter compared to length and can be utilised in either primary, secondary or tertiary milling software to cut back stuff from ~20mm to really nice product measurements measured in microns or mesh.


These 2 different varieties of mills are filled with different compositions of milling media. SAG mills contain balls of upto 150mm in diameter that occupy 5%-18percent of mill room quantity. Ball mills, conversely, comprise grinding media up to 50mm in diameter, so occupying in between 25% - 40 percent of mill room quantity. To efficiently reduce material size, every kind of mill needs to build different charge loading activities, or the kind of movement evidenced from the mill's contents. SAG mills generate higher levels of impact reduction and ball mills increased degrees of abrading action.



A mill lining procedure serves 2 purposes: to guard the mill shell from wear caused by the effect and abrasion of their mill bill, and to lift and tumble the mill contents from the essential way to make a milling action. To do this, the more mill liners foundry account must be assembled from high use resistant substances and feature proper geometry to support ascertain the elevation of their mill bill and by what method the material will be earth.


A contrast of SAG and ball mill fee actions is displayed below. Figure 1 displays the sliding abrasion activity of a ball mill while figure 2 defines the cascading influence action of the ball mill. The geometrical differences from the liner technique lifters can also be viewed.


Rubber and blend mill liner systems


In earlier times grinding mills had been on average lined with throw alloy linings of varying steel or iron metals, and lining system choice was typically driven by grade of wear protection and also cost. As substances design and technology procedure features progressed, now many superior alternatives are present to alloy linings.


Rubber chemicals are made to shield mill cubes out of wear, while fresh cast metals and wear resistant plates could be secured into rubberized to withstand substantial effect abrasiveness. There is a higher comprehension of how mill lining systems influence mill performance. Operators now pick mill liner techniques on greater criteria including skill to deliver mill procedure performance, wear resistance, simplicity of setup and security. Furthermore, yield on investment and total cost of ownership units are crucial facets in the decision making procedure, as opposed to cost independently.

Creation date: Oct 1, 2020 3:36am     Last modified date: Oct 1, 2020 3:36am   Last visit date: Jul 6, 2022 9:30am
    Report Objectionable Content