The busbar processing machine is mainly suitable for high and low voltage switchgear and transformer manufacturing industries, and is used to process copper and aluminum busbars of various specifications. As long as the busbar punching, cutting and folding can be carried out on the corresponding processing unit, the production efficiency is high.

4. Check whether the hydraulic pipeline is unobstructed, whether there is aging and leakage;

The busbar processing machine is easy to use, and its production efficiency is significantly higher than that of traditional busbar processing equipment. The working stroke of each unit can be adjusted conveniently, reducing auxiliary processing time and improving production efficiency. A variety of processing functions can also be realized by changing the mold, such as embossing, flattening, pressing cable joints and button twists. The machine is equipped with casters, which can be easily moved by adjusting the four legs.

2. General cleaning method, soak the bearing in kerosene for 5-10 minutes, pinch the inner ring with one hand, and turn the outer ring with the other hand, the dry oil or anti-rust paste on the bearing will fall off. Then put the bearing of the busbar processing machine into cleaner kerosene, rinse it with a fine and soft brush, clean the oil stains in the balls and gaps, then put it in gasoline to clean it once, take it out and put it on clean paper . When cleaning radial spherical ball bearings and short cylindrical roller bearings, the balls, ball frame, inner ring and outer ring should be separated and cleaned. The cleaning of the bearings installed on the shaft of the busbar processing machine mainly depends on the method of spraying oil or spraying with an oil gun. For simple cleaning, use kerosene first and then gasoline; for oil that is difficult to clean, use 100-200 °C Rinse with hot engine oil or spray with oil gun, then clean with gasoline. Be careful not to scrape the bearing with sharp objects: hard grease or rust, so as not to damage the smoothness of the rolling body and groove ring of the bearing, and dry the cleaned bearing with a clean cloth.

With the continuous updating and development of science and technology, busbar bending machine are now widely used in equipment in the electrical complete set manufacturing industry, in order to improve the working efficiency of busbar processing machines and ensure safer operation. It is very important to know how to operate the busbar processing machine correctly. Let me give you a detailed introduction.