The topic I want to share with you today is the instruction manual of the busbar bending machine. I hope to pass the explanation below. You can have more understanding of this aspect!

Regular inspections and maintenance facilities of the motor motor of the bus to ensure their normal office. The quality of the motor to stretch the facility technology is effective for the normal start work of the motor. Therefore, the motor's controlling facilities should be located in a dry, ventilated and easy -to -operate position, and regularly remove the dust. Often check whether the contactor contacts, coil iron cores, various wiring screws, etc. are reliable, whether the movement of the mechanical parts is flexible, so that it will maintain a satisfactory technical condition. Therefore, the motor is guaranteed that the motor does not encounter difficulty in office without being burned.

Overall: After entering the 21st century, with the continuous improvement of the core processor of the CNC system, and the servo driver device, PLC, driver motor, precision sensor, hydraulic execution components are widely used in the CNC bus, so that the current number control bus is winding. Fast speed, the accuracy of the coil, and the production benefits will be greatly improved. In addition, as the CNC busbar bending machine from the universal type to the dedicated type, there will be more and more special type control winding machines specially used in various industries. This is also the direction of the future development of CNC bus. : 0760-. Specializing in the production and sales of twisters | Maternal wire machine | Automatic winding machine | Full Automatic Dutch Machine | Transformer Bareer Machine | Electric Bare Machine | Circuit Bareer Machine | Heat Bareer Machine | Pain Bag Bareer | High -frequency transformer parent line | Single -axis buser | Multi -axis buser | Electrostatic Valve Bare Machine | High -speed Bareer | CNC Bare Machine | And various non -standard machinery equipment. Essence Bare punching machine instruction manual

busbar bending machine hydraulic oil road: Check the fuel tank fuel level every week. After the hydraulic system is maintained, it should also be checked. The oil level should be injected with hydraulic oil when the oil window is lower; the oil tank should be cleaned at each time the oil is changed; the system oil temperature should be at 35 at 35 Between ℃ and 60 ℃.

The shear method used by most copper row machining machines of the bus punching machine is shown in Figure 1 (a), which is a dislocation shear. In this way, the design of the mold is simple and the tailoring is simple, which is convenient for users to understand, operate and maintain. However, the copper row incision is often uneven, the incision is smooth, and the incision is inclined to meet the requirements of the usage.

Every time the CNC punching positions have a certain range of processing, such as my PEGA-345, the processing range of the one-clamp positioning is: X direction 1270mm, Y direction of 1000mm. When the X direction exceeds this itinerary, it must be necessary to exceed this itinerary. When the clamping is shifted, the remaining processing is completed. When the clamping is shifted, first, press the sheet material to press the sheet material, the clamping is loose, the clamping clamp is moved to the specified location, clamp it again, and continue processing.

Various electric motors, solar lights, various size transformers, TVs. Mid -week, inductance coils for radio, output transformers, electronic ignition, high -pressure coils on mosquito wizards, speakers, headphones, and microphones, the coils in these need to be used to use the parent line machine. user's Guide

The power distribution transformer my country's small and medium -sized power distribution transformer was originally developed with insulating oil as the insulation medium; in the 1990s, the transformer parent line machine only developed quickly in my country.