Manual

Although there is a problem with the busbar machine, there is no need to explore the source of the problem one by one after there is a problem. But how to do it after you know which problems? The first thing to do is to quickly infer the specific problems of the incidence according to the position of the fault source provided by the display board and some maintenance instructions. Location and may cause the reason for such problems. Then use some excluding methods to be error -free and confused in the secondary position. Finally, when you read the solution above the manual, please come to persons responsible for maintenance to disassemble. Remember, non -specialized personnel must not deal with it without permission.

Finally, click the "Oil Pump Movement" option under the selected dialog box. At this moment, the oil pump has been launched, and then select the "inch movement" or "single" option ("inch mobility" refers to the touch screen operation, "single" refers to the foot pedal Switch operation). To stop the use of the "successive" option function, after the oil pump is launched, it should be carried out for 5 minutes before applying the operation. The pressure of the hydraulic system is set to 260kg/cm2 to stop the nominal operation pressure of the hydraulic system, or it must not be used over pressure. In the "Bend Operation" main menu dialog box, if you need to use the "Bending Programming" option, click this function to pop up the "Bend Programming" main menu dialog box. Manual

The internal row bus contains electrical systems and mechanical systems. If the operator is improperly used, it is dangerous. The operator should carefully read the random supporting manual before the operation, be familiar with the operating method, obey the operation process, and avoid incorrect operational damage to the bus machine and cause work injury accidents. The following is the absolutely prohibited behavior of the operator:

The hydraulic electric pump of the Tower Bare Machining Manual mainly refers to the electric pump driven by hydraulic pressure. When installing the hydraulic electric pump, in order to prevent the miscellaneous objects from falling into the machine, all hole eyes should be covered. The following editors will share the relevant content of the hydraulic electric pump.

Multi -site CNC bus processors are convenient and high in production. The work strokes of each unit can easily adjust and reduce processing assistance time, and improve production efficiency. By replacing molds, a variety of processing functions can also be implemented, such as pressure flowers, flat, voltage cable joints, and buttons. The machine is equipped with a foot wheel. By adjusting the four supports, it can be easily moved.

The above is the introduction of the processing advantages of copper row processing machines. At the same time, our CNC has a professional management team and advanced production equipment. It is a powerful guarantee for our achievement of high -quality products. We sincerely welcome to come to our company to inspect on the spot. Manual

When the hydraulic oil passes through the drooling and gaps of the valve section, it must withstand the severe shear effect, resulting in some macromolecular polymers in the oil, such as the molecule of the adhesive to break into small molecules, reduce the viscosity, should be the viscosity. It is not available to a certain degree of oil, so it is required to have good shear resistance.