To make sure your calendar, event reminders, and other features are always
correct, please tell us your time zone (and other details) using the
drop-down menus below:
Set Date/Time format:
In 12 Hour format the hours will be displayed as 1 through 12 with “a.m.” and “p.m.”
displayed after the time (ex. 1:00p.m.). In 24 hour format the hours will be displayed as 00 through 23 (ex. 13:00).
You can always change your time zone by going to your Account Settings.
Use the dropdown menu to view the events in another time zone. The primary time zone will be displayed in parentheses.
Use the dropdown menu to view the events in another time zone. The primary time zone will be displayed in parentheses.
Visiting Bruce Zhu(username: busbarbendingmachine)
Tag
Please wait...
Select a Color
Manage Applications
Check the items that you want displayed. Uncheck all to hide the section.
Calendars
Files
Addresses
To Dos
Discussions
Photos
Bookmarks
The “Switch Navigator” button will no longer be available after February 14, 2017.
Please learn more about how to use the new Navigator by clicking this link.
Operation method of busbar processing machine
Howo to operate the busbar machine ?First, turn on the power, turn on the key switch on the control panel, and then press the oil pump to start, so you can hear the sound of the oil pump turning. (The machine does not operate at this time)
It is necessary to pay attention to the adjustment of the stroke when using the busbar bending machine, and it must be tested before bending. When the upper die of the bending machine descends to the bottom, there must be a gap of plate thickness. Otherwise it will cause damage to the mold and the machine. The stroke adjustment also has electric quick adjustment and manual fine adjustment. For the selection of bending notches, a notch with a width of 6-8 times the thickness of the plate is generally selected. If you bend a 4mm sheet, you need to choose a notch around 24 or 32.
Backgauge adjustment generally has two kinds of electric quick adjustment and manual fine-tuning. When adjusting, the stop finger should be adjusted to the upper surface of the lower mold to prevent damage to the bus bar machine. No people are allowed to stand near the backgauge, and the backgauge protection door must be closed. . Step on the foot switch to start bending. The bending machine is different from the shearing machine. You can release it at any time. When you release your foot, the bus bar machine will stop, and then step on to continue downward.
Attach this document to an event, task, or address
You can attach a link to this document to an event in your Calendar, a task in your To Do list or an Address. Check the boxes below for the data you want to
bring into the event’s or task’s description, and then click “Select text to copy” to have the next event or task you create or edit have the document text and link.
