As long as the user can perform punching, shearing, and folding of the mother on the corresponding processing unit, the production efficiency is high. The processing technology of the CNC bus processing machine can be summarized as follows:The CNC busbar machine is suitable for processing periodic composite production parts. The market demand for some products is periodic and seasonal. If a special production line is used, the gain is more than the loss. The processing efficiency with ordinary equipment is too low, the quality is unstable, and the quantity is difficult to guarantee. After the first piece of trial cutting with the machining center is completed, the program and related production information can be retained, and the next time the product is reproduced, it only takes a long time to start production.

The CNC busbar processing machine is suitable for processing high-efficiency and high-precision workpieces. Some parts require little, but they are key components, requiring high precision and short construction period. The traditional process requires multiple machine tools to coordinate work, which has a long cycle and low efficiency, and is in a long process flow. Among them, it is easy to produce waste products due to human influence, which can cause major economic losses., and the processing center is used for processing, and the production is completely controlled by the program, which avoids long process flows, reduces hardware investment and human interference, and has high production efficiency and quality. Stable advantages. CNC bus processing machine is suitable for workpieces with suitable batches. The flexibility of CNC bus bar machine processing center production is not only reflected in the rapid response to special requirements, but also can quickly achieve mass production, possess and improve market competitiveness. Machining centers are suitable for small and medium batch production, especially small batch production, in application When machining centers, try to make the batch larger than the economic batch to achieve a good economic effect. With the continuous development of processing centers and auxiliary tools, the economic batch is getting smaller and smaller. For some complex parts, 5-10 pieces can be produced, or even Machining centers can also be considered for single-piece production.

The application of four-axis linkage and five-axis linkage machining center and the mature development of CAD/CAM technology have greatly increased the complexity of processing parts. The use of DNC makes the processing content of the same program sufficient to meet various processing requirements and make complex parts automatic Machining becomes very easy. The CNC busbar bending machine machining center is also suitable for processing multi-station and concentrated work pieces; difficult to measure workpieces. In addition, workpieces that are difficult to clamp or are completely aligned and positioned to ensure the machining accuracy are not suitable for Produced on a machining center.