To make sure your calendar, event reminders, and other features are always
correct, please tell us your time zone (and other details) using the
drop-down menus below:
Set Date/Time format:
In 12 Hour format the hours will be displayed as 1 through 12 with “a.m.” and “p.m.”
displayed after the time (ex. 1:00p.m.). In 24 hour format the hours will be displayed as 00 through 23 (ex. 13:00).
You can always change your time zone by going to your Account Settings.
Use the dropdown menu to view the events in another time zone. The primary time zone will be displayed in parentheses.
Use the dropdown menu to view the events in another time zone. The primary time zone will be displayed in parentheses.
Check the items that you want displayed. Uncheck all to hide the section.
Calendars
Files
Addresses
To Dos
Discussions
Photos
Bookmarks
The “Switch Navigator” button will no longer be available after February 14, 2017.
Please learn more about how to use the new Navigator by clicking this link.
The Autel IM608 Pro Program 2017-2020 Chevy Silverado All Key Lost
Autel IM608 Pro Program 2017-2020 Chevy Silverado All Key Lost
Autel MaxiIM IM608 Pro can program 2017-2020 Chevrolet Silverado all key lost via OBD successfully. Besides, it also supports to do add key & read password. Autel IM608/ IM508 + XP400Pro has same immo function but cost-efficient than IM608Pro, which is a good investment for locksmiths.
More vehicle coverage please check: https://www.autel.com/vehicle-coverage/coverage2
Following is using Autel IM608 Pro as an example. FCC: HYQ1EA Note: Must have 2 smart keys.
Connect Autel IM608 with OBD, press IMMO >> Accept >> Chevrolet >> Manual selection >> USA >> Silverado 3500 >> 2017-2020 >> Smart key >> Yes >> Immo status scan
Press START/ STOP button once.
Clear DTC(If any) >> All smart keys lost >> Start
Do you want to start PIN data reading? Yes (If PIN data of current vehicle has been read and saved, press “No”.)
Make sure IM608 has network connected with successfully. Note: 1.For this function process, it is recommended to use a USB cable connect the diagnostic tool to VCI, otherwise the function may fail. 2.For some models, network connection is required for execution of this function. Ensure stable network connection.
PIN code read successfully, please record.
Do you want to start DTC clearing? Yes Do you want to start key learning? Yes Press START/STOP button once.
Place the smart key to be learned into the key slot and take other keys out of the vehicle. The key slot is usually: 1.In the armrest box. 2.Under the bottle rack. 3.Besides the ash tray. 4.In the glove box.
IM608 will fill in the pin code automatically. Switch ignition off. Wait processing until 100%…
Press the START/STOP button once.
The current key is complete the matching. Press “Yes” to program next key, otherwise “No”.
Switch the ignition off. Press the START/STOP button and hold for 12s. Release the START/STOP button.
Long press the START/STOP button to turn the ignition on until the instrument light illuminates.(If the instrument light is not illuminating, please release the START/STOP button and repeat it.)
Switch the ignition off. Depress the brake, press START/STOP button to start the engine and wait 5s. Switch ignition off.
Note: 1.Turn off the engine. 2.Open and close the driver door. 3.Remove the smart key, press the lock and unlock buttons simultaneously, and then release the buttons.
Is there another key to be synchronized? No Number of matched key: 1
Test the key, it does work well. Programming has done!
This is how to use Autel IM608Pro to program Chevy Silverado 2017-2020 all keys lost successfully.
Attach this document to an event, task, or address
You can attach a link to this document to an event in your Calendar, a task in your To Do list or an Address. Check the boxes below for the data you want to
bring into the event’s or task’s description, and then click “Select text to copy” to have the next event or task you create or edit have the document text and link.
