Turret busbar machine equipment
The topic I want to share with you today is the turret busbar machine equipment. I hope that through the following explanation, you can learn more about this aspect!

Maintenance electricians often need to prepare low-voltage electrical coils in their work, which can be wound by semi-automatic busbar machines. The semi-automatic bus machine can wind small motor windings, low-voltage electrical coils and small transformers, etc. The semi-automatic busbar body is small, light in weight, easy to operate, and can memorize the number of winding turns. When winding the coil, the operator straightens and arranges the wires evenly, and the number of winding turns can be read from the counter. The following points should be paid attention to when using the semi-automatic busbar machine.

Turret busbar machine equipment Many fully automatic bus machine customers use the equipment according to the factory's settings and configurations after purchasing the equipment, and some customers need to change the parts and functions of the bus machine to meet their own production process. When designing and manufacturing, a certain position margin is generally reserved for maintenance, replacement of parts, etc. Customers can use this margin to make certain improvements, but all improvements must be within the maximum allowed by the equipment, and the equipment will be damaged if it is modified blindly. equipment.

Choose a few more for comparison. Talking about shopping around, in addition to purchasing from regular businesses to allow users to choose turret busbar processing machines with guaranteed quality, they also need to choose a few more companies for comparison in the selection process. After all, comparison is the There will be differences, so that users can choose the best quality processing machine.

The faults of the CNC bus machine need to be classified according to the nature, appearance, cause or consequence of the fault, and tests cannot be taken blindly. Finding the root cause is the key, here is a detailed list of various types of failures for you:

The winding workshops of all enterprises should strengthen and implement the daily inspection and maintenance system of the automatic wiring busbar machine, and establish standardized inspection and maintenance data files to ensure the safe use and normal operation of the busbar function. The operators and maintenance of the busbar machine should be strengthened personnel training. Turret bus machine equipment

It is easy to use and the production efficiency is obviously higher than that of traditional busbar processing equipment. The working stroke of each unit can be adjusted conveniently, reducing auxiliary processing time and improving production efficiency.

The hydraulic cylinder of the turret bus machine equipment and the surrounding environment should be clean. The fuel tank must be sealed to prevent contamination. Pipelines and oil tanks should be cleaned to prevent falling off scale and other sundries. Clean with a lint-free cloth or special paper. Twine and adhesives cannot be used as sealing materials. Hydraulic oil according to the design requirements, pay attention to the change of oil temperature and oil pressure. When no-load, unscrew the exhaust bolt to exhaust.

The moving parts of the CNC busbar machine should be kept clean, oil should be supplied several times a day to ensure the normal operation of each unit, and the oil level and pipelines should be checked before starting up every day, and whether the electricity is abnormal, and if there is any abnormality, please eliminate it in time before starting work.