The topic I want to share with you today is how much the processing size of the three -site copper row machines. I hope that through the following explanation, you can have more understanding of this aspect!

CNC's busbar bending machine uses CNC systems. The equipment is simple, the structure is firm, the structure is solid, and the impact is resistant to impact and does not deform for a long time. Equipment operation application human -machine interface, real -time reflects the running state of the equipment program, and has the function of equipment fault information alarm function. Hydraulic motors use high -energy -efficient motors in international and domestic well -known brands. Under the same working conditions, electricity saves power.

According to the technique of different output torque of different width, the combination of the transmission of the six -speed transmission of the frequency conversion motor and the mechanical of the mechanical is used, that is, the stepless frequency conversion speed regulation is realized, and the reasonable configuration of the motor power is realized. Because the large -sized winding winding is tight, the tension is large, and the main axis requires a low -speed and large torque output; and the small -sized winding winding is tight, the required tension is small, and the main axis requires a high -speed small torque output. If you do not use mechanical transmission, you need to use a 40kW motor to output 1000Nm torque; and the six -speed mechanical transmission is used, and the 1000Nm torque only needs to use a 3KW motor. Therefore, on the basis of foreign device variable frequency speed adjustment, the combination of six -speed mechanical changes and it, that is, expanded the range of speed (25-357R/min), saving energy and reducing costs. What is the processing size of the three -station copper row machine

Open the equipment power switch and stepping on the switch. The unit oil pump is started. Step on the pedal switch, the scissors will move forward, loosen the foot switch during the progress, and the scissors will stop running. Step on the foot switch again, and the scissors will continue to move forward. When it is close to the limit switch, the scissors will automatically return to the upper stop point. When you need to return to the scissors during the process, press the scissors on the corresponding manual back button to return, and the scissors on the cut button on the back button will stop and retreat.

The processing size of the three -stage copper row machine is mainly used for the multi -angle bending of the copper stick space, automatic positioning, automatic cutting, and punching function of copper stick space; Or divided) automatic processing (when the length of the workpiece is expected to meet the length of the workpiece). Equipment human -machine interface operation is easy to operate and has storage and retraction function.

In the end, we must remember that the supporting mold must be selected. Remember not to mix the upper and lower molds of different inner diameters during punching. When processing for a long time, it must be consistent with the direction of the upper and lower molds. Otherwise, it will damage the mold.

Keep the oil clean and the oil circuit is unobstructed. Electrical and hydraulic elements must ensure flexibility and correct positions, and parking must be stopped immediately when abnormal phenomena are found. Turn off the work button of each unit when not working, and turn off the power switch on the operation disk. What is the processing size of the three -station copper row machine

In recent years, with the continuous deepening of my country's "energy conservation and consumption reduction" policy, energy saving has become the mainstream of social development, and energy -saving transformers will also be the main development trend of the future market. At present, some high -energy -consumption power distribution transformers operating on the Internet no longer meet the industry. The development trend is facing the needs of technological upgrades and updates. In the future, it will gradually be replaced by energy -saving, material -saving, environmental protection, and low -noise transformers. my country is also improving the relevant standards of energy -saving transformers to further standardize the industry market.