The temperature data of the busbar machine can be passed to the measurement instrument at a low potential through infrared light waves or radio waves. Because the measurement point may be several, for the convenience of control, the measured data has an address recognition code.

What is the service life of multi -station copper row processing machines to improve the use of the CNC bus milling machine. Generally, it is necessary to avoid direct exposure of sunlight and other thermal radiation, and to avoid places with too humid, too much dust, or corrosive gas. Corrosion gases can easily cause electronic components to be corroded and deteriorate, resulting in short circuit between poor contact or between components, affecting normal operation. CNC bus milling machines should stay away from large vibration equipment, such as punching and forging equipment.

The lack of core talents in the parent line industry has always been a problem that plagues the industry. The lack of high -end talents faced by employees and the problem of marketing with users.

The bus machine is combined by the three major components of hardware, software, and accessories. The hardware failure can be judged by replacing the same type of components of the same type and the same type. This method is suitable for components that can be replaced by kit. Common brakes, counter, inverter and other components can be used. You can judge the fault through this method. In short, after the bother of the bus, the fault point and the cause of the occurrence must be first determined in a timely manner, and the corresponding maintenance methods can be customized according to the fault conditions in order to quickly and effectively handle the problems of the equipment.

During the winding process, the full -automatic winding machine will hear a very subtle sound of "um", which is the sound of the motor rotation; when the shaft slides The sound of gases is generally more pleasant, and there will be no harsh sounds. Experienced people can determine whether the winding machine is abnormal through the sound. What is the multi -station copper row processing machine

Large torque winding machine is a very common machine that can be widely used in various industries. In order to meet personal needs in the future, it must continue to improve. What requirements do people use people to use?

What is the heating and stability of the multi -station copper row processing machine. In the short circuit, a large heat generates a lot of heat in the conductor. It is too late to be distributed in the surrounding air, so that the temperature of the conductor can be increased rapidly. Due to the short duration of the short circuit, the allowable temperature should be compared to compared with the short circuit. The allowable temperature to heat up for a long time is much higher. When the copper and aluminum naked parent lines are short -circuited, the temperature allows temperature to be 300 degrees and 200 degrees, respectively. When choosing the bus, the short -term heat fever temperature obtained by the short -circuit of the bus should be less than the allowable temperature to heat on the actual bus.

Today, I will introduce the rust -proof method of the homeline processing machine and analyze how the rust of the bus processor appears. I hope to help the majority of customers, and improve the service life of the equipment and the standard of processing workpieces, so as to improve the work can improve the work. Efficiency and company benefits.