The automatic line function that can be implemented by the automatic busbar bending machine is an improvement in traditional coil winding processing process. It replaces the tedious winding operation of artificial control wiring. Methods, but in some special electrical products, the winding is required to use a certain spacing form, so how to achieve the winding of non -secret coils?

The itinerary is adjusted, and the use of hydraulic bending machines must pay attention to the adjustment of the itinerary. Before bend, you must try the car. When the bending machine is modular to the bottom, it must be guaranteed to have a thick gap. Otherwise it will cause damage to the mold and machine. The adjustment of the itinerary also has rapid adjustment and manual stomach. Instructions for use of hydraulic copper row processing machine

There are many role and knowledge about the parent line processing machine. Interested friends can often pay attention to our Jianda website. Every day, there will be the latest information and professional technical support. I believe you will gain a lot here. The products of the company make the development of enterprises a higher level.

According to the above requirements, the instructions for the use of the hydraulic copper row processing machine combine the specific structure, manufacturing method, working conditions, material prices and processing costs of the tools and molds. The selected tools and mold materials can be different. Therefore, specific problems and specific analysis should be. The following points are available for reference when selecting materials:

The conventional automatic buser is generally used in the automatic winding processing of the circular line. In recent years, with the market of the products such as electric antibodies, many users have proposed the process of automatic section of the flat line. In response to these special process requirements, flattened requirements, flattera The new model of the line automatic bus is born.

Method of the automatic rotor of the automatic bus service: It is a precision motion component for high -precision scrolling equipment and dedicated drivers used to achieve closed -loop operation control. During the operation, the design meets the processing of precision coils. Instructions for use of hydraulic copper row processing machine

When using it, we must have basic maintenance and we cannot let it develop, so we must focus on timely protection and maintenance of the machining machine. I often insist on doing a little, saving time and effort than discovering it. The motion of the bus processing machine should be kept clean, and the oil gives oil several times a day to ensure the normal work of each unit. Before turning on daily, check the tube of the oil level. Whether the electrical is abnormal. If there are abnormalities, please be eliminated in time. Regularly check the liquid level in the fuel tank in the fuel tank (every working day). When the oil is insufficient, please add it in time. The hydraulic oil must use the prescribed type of anti -abrasion hydraulic oil.