The rated peak tolerance current of the busbar cutting punching and bending machine refers to the current peak of the bus tank tolerance under the specified test conditions, and its value is the product of the short -term tolerance current (square average) and coefficient.

Secondly, the quality of the power supply will also affect the main axis operation of the bus and the precision of the line. The main axis motor of the bus is generally controlled or DC motor. The electrical characteristics determine that the power supply voltage needs to be stable accordingly. It directly affects the work of the spindle motor. The long -term work of the motor will accelerate the damage of the motor when the heat is higher than the rated voltage. The bus lines are generally used by the step motor. The step motor has high requirements for the power supply, low voltage and low voltage and High voltage will burn the coil of the motor. Where is the portable copper row processing machine?

The equipment of the equipment is less than nine seconds, and each station with no less than 400PCS/H equipment does not cause the product to cause secondary adverse two times, and the adverse rate is less than 0 % of the material itself.

Our company is strictly strictly in accordance with the relevant standards in the production of sheet metal groove machines, CNC shaving machines, and combined punching beds, and adopts advanced technology. The product performance is superior. It is generally better than other similar products. Combined punching machine is trustworthy manufacturers.

Where is the portable copper row processing machine? Therefore, the industrial development of Jinan Dalin Machinery, the guidance of the market leader and the service of the service. The level and vertical constituent elements of the association, "" You are the company's dealer of the e -vendor's business. In order to maintain the Chinese name, control system, and the Chinese name of the nation -control system, the control system, and the pipeline industry association. The main mode of transportation and overseas acceleration, thereby deciding to add and nostalgic salt expansion of nuclear energy development.

When soaking the paint, the paint solution should be appropriate, too thick (large viscosity), it is not easy to immerse in the inside of the transformer, and it is easy to remain uniform lacquer layer when dripping. Not strict, after soaking the paint, the transformer has a uniform appearance of the appearance of the transformer, and there is no serious flowing phenomenon.

Whether the hydraulic oil has good oil and sufficient oil. Washing the solenoid valve and check whether there is a problem with the spindle bearing. Whether the fastener is fastened, the connector is loose, and whether the electrical line is aging. Where is the portable copper row processing machine?

Evaluating the performance of a parent line machine, in addition to working characteristics (such as torque, efficiency, power factor, etc.), the starting characteristics of the parent machine machine are also an important indicator. The reliability of the bus is largely depends on the quality of the starting performance.