The compressed air comes from the fuel injection screw air compressor. When the pressure of the general pipe provided to the maximum value set by the pressure sensor, the power supply of the solenoid valve is closed. The host runs in an empty load. If the pressure of the main pipe in 6min has not dropped to the value set by the pressure sensor set, the system is closed; if the pressure of the general pipe is reduced to the value set by the pressure sensor in 6min, the power supply of the solenoid valve is re -connected to the power supply. , The compressor switch to the load run, safely provides the constant pressure required by the bus.

The parent line machine of the four -in -one copper busbar machine needs to be maintained. The author also wrote such an article before: The normal maintenance of the bus is necessary. It is indeed that the maintenance is proper. The benefits generated are inestimable. However, it is necessary to know that the routine failure of the bus and timely maintenance must be known to be properly maintained.

The punching unit of the Tower -type bus processor uses the Tower -type mold library, which can store up to 8 sets of molds. The long circle hole is arbitrarily prepared. Generally, the commonly used molds can be installed on the turntable, or the pressure flowers can be placed on the turntable. You can choose an appropriate punch mold for work. The operation is simple. Productivity.

The multi -functional bus processor is used for complete sets of power transmission and distribution equipment, and power sets of production and processing manufacturing enterprises. This machine work at the same time, one machine and six stations work at the same time, independently complete cutting, punching, large bending, small bend (folding shape), pressing flowers, cable heads, etc.;

Magnetic suction cup: It is generally suitable for the steel plate table and cast iron table, and fix the workpiece with magnets for medium -intensity grinding processing. Generally, the foam mold carving machine is used to fix the foam. Four -in -one copper row processing machine manufacturer

The tie machine is such a popular mechanical and equipment. It has many years of development prospects in the domestic market. It has brought more fast production efficiency and productivity to major manufacturers, so that the quality and quality of the product are strong ensure.

Due to the pressure and calories of the four -in -one copper row processing machine, the small particles of the board will be bonded on the surface of the head, resulting in poor punching quality. Remove the sticky material can be polished with fine oil stones. The polishing direction should be the same as the direction of the jumping movement.

The rinse and scissors are processed by a stand -up process, which is flexible and convenient to operate. The cutting is cut or flushed, and the cutting workpiece is flat. The punching unit of the tower -type parent line machining machine adopts a turning tower structure, and the cutting is cut or flat -cut (cutting without waste). The fracture is flat, and the verticality of the section is guaranteed. The work itinerary of each unit can easily adjust, reduce processing assistance time, and improve production efficiency.