Ranking of the busbar bending machine (Quotation of Hebei CNC bending machine)

The above are the faults that we often see the homelines for you. I hope it will be helpful to you understand the bus. At the same time, our company is a professional parent processing machine manufacturer. We will use the most sincere heart to serve you. Satisfaction is our greatest pursuit!

In the application process of the circular busbar bending machine, you also need to be able to do general daily inspections and regular thorough inspections in order to ensure the long -term use of the equipment. And for this kind of device, no matter in daily inspections, or in regular inspections, multiple parts outside are required to focus on and carefully check. Rules of the bus punching machine manufacturer ranking

The advantage of the busbar bending machine  is high -efficiency and beautiful appearance, but the ring -shaped transformer with a tall and small cave eyes is more troublesome, and it is not as good as manual winding in terms of the reliability of the insulation processing process. Manual winding can make the transformer's leakage very small. It can adjust the layout of the coil turns during the winding process at any time. The only disadvantage of the hand -made winding is low efficiency, slow speed, and generally producing production generally. Select the buser system.

The bus machine is mainly suitable for high and low pressure switch cabinets and transformer manufacturing industries, which are used to process copper and aluminum parent lines of various specifications. The bus processor user can carry out the parent line, cutting, and discount processing on the corresponding processing unit, and the production efficiency is high.

The row of the bus punching machine manufacturer is set on the basis of fully considering the machine and the bus row movement. The unrelated personnel do not enter the scope during runtime to avoid danger. Pay attention to the tip of the tong clamp to hurt the fingers and touch the operator when moving.

It can be seen from the above that the tensile value of the stand -by -line winding machine is over hour. After the coil winding is completed, the coil is small, and the wires are questioned, and the B -end size is greater than the technical request value. Properly increased vertical winding machine pulling machines can reduce the size of the B -end of the cake, and smallly affect the wire score, thereby improving the problem of large size B -end size. However, when the tension is excessive, it will cause a small coil to meet the technical request. It can be seen that the tensile force is closely related to the coil size. When the coil is winding, the winding machine is adjusted to the corresponding matching value.

Check whether the "two -position and four -way" direction valve that controls the oil circuit controls the oil circuit is normal. If it is, it causes the liquid valve to be unattended, so that the upper cavity and fuel tank charging liquid can be connected and cannot be pressed. The reason why the valve cannot work normally is that they are not powered on or stuck. Rules of the bus punching machine manufacturer ranking

The bus processor has three processing units: shear, punching, and bending. It is mainly suitable for high and low voltage switch cabinets and transformer manufacturing industries to process copper and aluminum parent lines of various specifications. The main functions are copper and aluminum parent lines of different specifications. You only need to use the corresponding processing unit to easily and quickly cut the copper and aluminum rows (round holes, waist -shaped holes), flat bend, flat, and bending, flat, and bending, and bending. Various processing of standing, pressure flowers, flattening, twisted twist, and voltage cable joints. It is widely used in electrical setting industry such as high and low voltage switching cabinets, substations, bus sinks, chassis cabinets manufacturing. The bus processing machine of the parent line machine factory store is a supporting equipment designed by reference to advanced foreign products and combined with domestic reality to improve work efficiency and ensure the safety of operating safety. It is an indispensable ideal equipment for the electrical industry.