Multifunctional hydraulic bus machining machine specifications (how much is the Hebei copper platoon parent row processing machine)

Copper lines of lacquer bags (winding electronics. Electrical products of the inductor coil), textile lines (gauze, thread groups for winding textiles), and electric heating lines and welded lines for winding electric heaters are commonly used The line of the system.

The bending unit adopts a closed overall frame structure to make it more uniform in processing flat bending and pressing flowers, which greatly improves the duplicate positioning accuracy during mass production and extend the service life; It is more secure and convenient for processing during processing.

CNC punching has more flexibility in curve processing. A punch in a punch can have one or more sets, circles, or other special requirements. You can process some specific sheet metal workpieces at one time. In the case of the chassis cabinet industry, the processing technology they required is mainly cutting, square holes, and round holes. The patterns are relatively simple and fixed. They are mainly facing carbon steel plates below 6mm, and the surface is generally 5m × 25m or 5mx5m. Stainless steel with a thickness of more than 5mm or more. Because the material viscosity is too large, the mold is generally not used.

The specifications of multifunctional hydraulic parent line processing machines are secondly the maintenance of motion components. There are two main types of motion components and rotating parts of the motor component. Their main maintenance methods are lubrication and fixing. Usage and replacement are necessary items. Motion components are prone to loosening in the process of use, so regular inspection positions and fastening are the main maintenance work.

First of all, when the copper row bending machine is bent at the raw material, the center position of the bending raw material must be aimed at 0 degrees the scale of the bronze bending machine itself. Will receive serious influences. Second, when the copper row bending machine does some special material bending work, it is necessary to understand the maximum bending angle of the material, because the maximum angle of many materials is 90. If it exceeds this angle, it will be more than this angle. Damage this material makes the material very easy to break. Finally, after a series of bending operations of the copper row processing machine, check whether the copper row processing machine knife head is distorted. If the bending should be adjusted or replaced in time.

In the end, the reform of the electricity price formation of "putting two ends and the middle of the tube" should be achieved. Of course, considering the operationability of reform, judging that domestic electricity reform will take the road of Japan and French gradual progress. The short -term breakthroughs include: direct purchase of electricity expansion, retail electricity from incremental to the stock, and independent accounting of transmission and distribution. It should be pointed out that the premise of reform is to clarify the cost of transmission and distribution. It is expected that this will also be the top priority after the start of the electricity reform, and the scope of accounting will be from the special channel to the area to the cross -region. Multifunctional hydraulic bus processing machine specifications

The CNC busbar machine clamping the angle fixture uses automatic middle technology, so that the pressure head can better press the reasonable stress point, automatically find the zero point of starting, use the supercharger to make the workpiece more stable, the processing surface effect better.