How to safely operate the CNC bus (the price of Shanghai CNC bus punching machine equipment)

Secondly, the importance of a few points above the different wires in the process of using the CNC automatic winding is different. Just use the copper line. For round lacquer lines. When setting the device parameters. Starting point, width, and high requirements for wire diameter. For example, the setting of the wire diameter, if the settings of the wire diameter are not correct, will cause a cumulative error. Errors are not tightly stacked or exhaust with the increase in the number of circles. To avoid this situation, our company's CNC automatic parent line series has a manual deviation compensation function. Speed secondary. The flat line is the opposite. The speed of the flat line must be slow.

How to safely operate a CNC busbar bending machine, one of the welded machines, one of the welds is that the speed of weld is very fast, and it is also very small, so welded under some special conditions, so this welded equipment is used to make this welded equipment. The operation is very simple. These devices can be operated through the electromagnetic field, and the laser can be processed and welded in specific frequent frequent often. The power density of this welding equipment is very high, so it should be noted when welded. The higher the power, the deeper the solder is.

Copper row machines mainly process various specifications of copper and aluminum parent lines. As long as users choose the corresponding processing unit, the user can perform the rush/shear/fold processing of the parent line. High production efficiency is an ideal equipment for the manufacturing industry of high and low -voltage appliances. There is no need to replace the mold. The copper row machine is equipped with a rinse/shear/fold processing unit, which can be processed by the rushing/shear/folding processing of the bus. The use of this machine is significantly improved by the use of traditional bus processing equipment, and it also improves the convenience of use. Below, there are a few features to learn together.

Most of the commonly used acid tin plated stabilizers are SN2+complexing agents, such as oxalic acid, citric acid, alcoholic acid, etc., and the complex ratio is effective alone. In addition, a catalyst also has the effect of stable plating fluid. Production shows that under the circumstances of continuous production, the plating fluid that adds this catalyst can maintain the time of more than half a year.

Do not use the CNC bus processor in an environment of corrosive gas, flammable, explosive, and tide. Otherwise, it will cause damage to the equipment components and even some electronic control units, resulting in the machine's unable to work normally, and it may cause fire. How to safely operate CNC bus

In order to improve the faulty arc protection capacity of the portable bus processor equipment, metal partition isolation prevention measures are generally adopted inside the structure to add pressure -leakage channels, arc detection devices, etc.

How to safely operate the CNC Bus Machine Special attention: You must turn off the equipment power supply to change the mold, so as not to cause personal injury to cause personal injury; the mold replacement must be kept clean; it is necessary Polying, damaging the mold.

The cutting unit can cut 3 to 12mm thickness and 160mm width copper (aluminum) row. When the shear quality is not good, be sure to check the blade and shear gaps; when cutting copper (aluminum) row, the workpiece should be placed in the middle of the upper and lower scissors as much as possible to avoid the stress of the cutting unit during the shear process. Unexpected.