Portable copper row bending machine Daily maintenance records (Shaanxi CNC parent exhaust ranking)

Cold forming technology is one -time automation. The cold form machine has now developed to 12 claws. In (0.3 ～ 1mm of steel wires, the function of 8 -claw forming function is basically set at one time. The current direction of forming process equipment: ① Improve the speed of forming, the main development trend is to improve the forming speed of the equipment, that is, production efficiency; ② by improving improvement The precision and thermal treatment effect of equipment parts can be improved to improve the durability of the equipment; ③ Increase the length sensor and laser rangefinder, and automatically closed the control manufacturing process for the CNC format.

Selection of equipment: The selection of equipment is the key. The container is generally plastic. The heating pipe must be copper, or the external heating method is selected (the relevant design and temperature control device can be provided by our company). Portable copper row bending machine daily maintenance record

The bending unit of the bus processor adopts a numerical control method, and has memory functions at the same time; A. Users can enter the processing data in advance, and the system is mixed up data according to the input information. B. , And call it reuse. C. Users can choose the current coordinate values at any time according to the thickness and requirements of the bending angle at any time.

Portable copper row bending machine Daily maintenance records of cleaning and cleaning method Put the bearings in the fire oil for 5-10 minutes, pinch the inner ring in one hand, the other hand changes the outer ring, the dry oil or rustproof paste on the bearings will drop down. Then lift the bus processor axis into a relatively clean fire oil, rinse with fine and soft brushes, wash the oil stain in the ball and gap in the gap, put it in the gasoline again.

During the winding process, sometimes the phenomenon of rotation or intermittent flight will occur suddenly. This will not only affect the lines, but also the interruption phenomenon. It is accurate. It can be seen that the running circuit is running, the control door, and a given device. The main thing is that there are faults in the speed regulation circuit. After inspection, most of them are because thyristor cannot meet the requirements of the circuit, that is, because the performance parameters of the canal control are not unable to meet the requirements, it cannot work properly. At this time, as long as the symposium is replaced, it can be solved. The above is the fault that is prone to occur during manufacturing and debugging and the corresponding solutions. I hope to help the majority of users!

The coordinate shaft produces exercise without a instruction, which may be too large, the position ring or speed ring is connected to a positive feedback, the feedback wiring is opened, and the measurement component is damaged;

Multi -site functional CNC busbar machine are convenient and high in production efficiency. The work strokes of each unit can easily adjust and reduce processing assistance time, and improve production efficiency. By replacing molds, a variety of processing functions can also be implemented, such as pressure flowers, flat, voltage cable joints, and buttons. The machine is equipped with a foot wheel. By adjusting the four supports, it can be easily moved.