What are the manufacturers of bending machines (what is the cost of the multi -station bus machine in Shandong)?

Electric control: Including electrical control boxes, touch screen operating boxes. The DVP-20PM00D mobility controller is used as the core of the control, the touch screen is used as a human-machine exchange, and the servo motor is used as an executive mechanism to achieve precise control of the rotation and lines to ensure the accuracy of the winding.

What are the safety operating procedures for bending machine manufacturers is an important measure to ensure the safe operation of the bus processing machine. When a failure occurs, the operator should pay attention to retaining the scene and truthfully explain to the maintenance personnel before and after the failure, in order to facilitate the analysis and diagnosis of the failure, and eliminate it in time.

When the device is running, especially when quotes, you should pay attention to the operation of the plate at any time. When you find that running a jam or other abnormal conditions, you should stop immediately and cut off the power to check.

After the oil pump is launched, it should be carried out for 5 minutes before pressure. The maximum pressure of the hydraulic system is set to 260kg/cm2. It is strictly forbidden to adjust the standard operation pressure of the hydraulic system privately. When the over pressure is strictly prohibited when the use of the parent processing machine is started, do not take between the upper and lower molds (blade) of the body or the body. The tools are placed on the workbench to avoid rolling into the mold or knife mouth to avoid accidents, and machines can be operated by multiple people, so special persons must be conducted to produce.

When the copper row processing machine brings us profits, we should not forget to maintain the copper row processing machine, because each device has its own work limit, how to better maintain it? Dalin CNC Introduce the main points of maintenance of the hydraulic system of the copper volume processing machine, I hope to bring you some help. What are the bending machine manufacturers?

There are many attachment functions to assist winding operations. Tension mechanisms and winding molds are very important attachments. The size of the tension value directly affects the tightening of the coil. The accuracy of the size of the mold will affect the accuracy of the equipment line.

What busbar machine are the main lines of the bending machine manufacturers are the main products operated by our company. Today, I will share with you the main points and maintenance of the bending unit of the parent line machine. I hope that through the introduction of this chapter, the buser can make you more handy.

The winding and processing product winding effect is basically a ring -shaped buser to complete. It has developed to play a more role in the field. However, due to the extensive use of parent machine equipment, many production environmental factors will not be controlled. Recently Due to the environmental temperature problem, the winding effect does not meet the actual production requirements. What changes do you need to make in response to environmental problems?