The role of the third -site parent row bending machine (the price of Hebei copper row parent line machine)
The topic I want to share with you today is that the role of the three -station mother row bending machine hopes to use the following explanation. You can have more understanding of this aspect!

Keystones such as the number control system, servo system, reducer, and plasma cutting system of the bus processing machine use the internationally renowned brands using integrated line control boards to improve the sensitivity of equipment operation. Its structures, high accuracy, good rigidity, small inertia, stable operation and other advantages.

In particular, when the replacement operation is needed, the longer -sized parent line will extend the work table. In this case, if the unrelated personnel does not notice, the body may hit the extended home line, and an accident occurs. The role of the mother row bending machine

Fine water inlet molds: The runner and the port are not on the division line, generally directly on the product, so it is necessary to design an additional set of water inlet division lines. The design is more complicated and the processing is difficult. Generally Essence The fixed mold part of the fine water inlet mold is generally composed of three steel plates. Therefore, there are also such structural molds as "three -board molds". Three -board molds are the simplest structure in fine water inlet molds. Bare punching mold

The role of the three -station maternal row busbar machine generally adds the tendency to increase the resistance of the exercise after adding lubricating fat. After excretion of excess fat, then 10-20 times of running-in operation, the movement resistance will become smaller and stable. In addition, the use of the problem of the exercise resistance conference can also reduce the amount of lubricating grease, but to ensure that the amount of injection not affect the lubrication performance;

The electromagnetic valve of the remote control port is not passed (frequent open) or the slide valve is stuck. Solution: Check the power line to see if it is connected; if it is normal, it may be that the slide valve card may be killed.

Take a look at whether the spindle water cooling has been supplying water. When the Person stone carving machine is turned on, the main axis cooling water is automatically turned on, reducing the phenomenon of damage to the main axis of the machine and the damage of the machine's main shaft. The role of the three -station mother row bending machine

What are the uses of the bus machine? Here we will take a look at the use of the bus. We can also ask our parent machine manufacturers so that we can complete our work better. Let ’s take a look at the use of our parent machine products.