What are the functions of the buser (how much is the Jilin CNC bus punching machine?

Performance assessment serves a variety of purposes of human resources management. On the whole, these purposes can be divided into two categories: management and development. The purpose of management includes retention, promotion, salary, rewards, dismissal, etc., and the purpose of development includes content related to improving personal ability and improving future performance.

What are the functions of the parent machine machine, we all know that the same batch and the same type of parent company will have different performances in different customer companies. It is easy to cause various unstable symptoms of unstable instability. A good factory environment includes temperature, temperature, ground, air, power supply, space, operator, etc. For factories with inappropriate environmental temperatures, too low or too high temperatures are the killers of all electronic products. This should be a consensus. Therefore, it is best to equip the bus workshop with auxiliary temperature adjustment equipment.

Today, electromagnetic current transformers are an iron core component. It is a non -linear element. When the current is very large, when the current contains a large DC component, when the iron core is large and the magnetic is left, and when the secondary load resistance is large, its working point will enter the saturation part of the magnetized curve to be the saturation part of the magnetized curve is to be a part of The judgment of the saturation of current transformers established by differential protection of differential protection is often caused by delayed movements of short -circuit spoofing protection in the bus.

Whether or not destructive when presented by faults is divided into destructive faults and non -broken failures. For destructive faults, damaged workpieces, or even busbar machine tools, rewriting is not allowed during repair. At this time Looking and analyzing to remove it, the skill is difficult and must be dangerous. If it can damage the workpiece, you can remove the workpiece and try to reproduce the fault, but it should be very careful.

In the bus processing machine ring network power distribution system, especially in a large number of systems that use the load switch of the ring network, if a short -circuit or grounding failure occurs in the next level power distribution network system, what are the parent line machines of the upper level power supply system? Function

This is an important point mentioned in the WatoBothight of the IBM Watson super computer program in an interview with the Wall Street Journal. He believes that with the improvement of the manufacturing technology of robots and artificial intelligence, mechanized production and some service industries full of mechanized work will enter a new stage.

What are the functions of the parent wire first? Let's talk about the type of automatic bus tail frame. At present, it is mainly divided into three types: manual, pneumatic, and electric types. There are also hydraulic tail frames in large automatic bus.

Rotate the rotation of the support material rotation. The main axis is driven by oil motor to rotate back and forth. There is a slot wheel friction plate on the main axis. There is a traction of the electromagnet traction. When inserting and inserting into the groove of the slot wheel,  When the main axis is passively rotated by the friction disk, the resistance torque of the resistance can be adjusted by rotating the thread of the nut to tighten the spring. When the groove is pulled out by the oil motor reversal, when the main axis is passively rotated, the resistance torque is generated. can promote the rough tone detection rod. When the diameter of the material roll is small, the roll is made by friction. The judgment of the size of the material roll is determined by the signal of the roll diameter measurement.