Three -in -one -controlling parent row processing machine 10 brands (Jiangxi Full Automatic CNC copper exhaust machine manufacturer ranking)

If the equipment occurs, after receiving the user's maintenance notice, the company's maintenance personnel will give a timely answer, and arrive at the scene within 24 hours (within 500 kilometers) to create a high -efficiency working environment for customers.

Core tip: The parent processing machine may change every 6 months or after using 5000 to 20,000 hours. Usually, when the color of 5000 hours or oil becomes brown and black, it should be changed. Three -in -one -controlling mother arrangement machine busbar machine 10 major brands

The greater the capacity of the transformer used now, the greater the impact on the grid, and the higher and higher security. The manufacturing quality of the transformer not only requires reliable electrical performance, but also mechanical stability and short circuit resistance. The stability mainly shows the control of the coil manufacturing process, that is, the electromagnetic balance of high and low pressure coils is required, and the axial turns are tight and distributed evenly. Therefore, the axial direction of the coil winding process is required to be tightened, and the radial direction must be rolled. The vertical bus is used to use the self -weight of the line cake. The axial direction is naturally compressed. Therefore, the winding of the high -voltage coil in the large transformer is generally adopted, and even the low -voltage spiral coil is produced by the low -pressure spiral coil.

The first thing to say is that before the bus processing machine is operated, the clothes that workers wear are flat, do not have a hairy corner, and it is best not to wear any accessories. These are to operate, and they will not be running during operation that they will not be running. The machine rolled in. Also, the weather is getting colder now, and the bus processor must be placed overnight before using it. If you suddenly start, some parts cannot keep up with the overall steps, so you need to preheat before use to determine After all parts are on the normal work track, you can start working.

Tri -in -one -controlling parent row processing machines The 10 brands of interference types are usually divided according to the causes of interference, noise interference mode and noise. Among them, the reasons for noise are different, divided into discharge noise, wave noise, high -frequency oscillation noise, etc.; According to the waveforms and properties of the noise and nature of the bus, it is divided into continuous noise, occasional noise, etc Donation and differential interference for co -mode. Common model interference and differential model interference are a more commonly used classification method. Co -mode interference is the power difference between the signal to the ground, which is mainly formed by the community (same direction) voltage of the power grid in the power grid, the difference between the land power difference and the space electromagnetic radiation on the signal line. The co -mode voltage can be converted into differential mode voltage through the asymmetric circuit, which directly affects the measurement and control signal, causing damage to components (this is the main cause of the high damage rate of some system I/O modulus). It can also be for communication. Differential mold interference refers to the interference voltage that acts between the signal poles, which is mainly used by the space electromagnetic field coupled induction between the signal and the voltage formed by the interference of co -mode interference by the unbalanced circuit. Accuracy.

Building new merits and building a Chinese dream! 2015 is the end of the "Twelfth Five -Year Plan" development, and it is also a key year for our transformation and innovation and scientific development. Seize opportunities, change and innovate, and successfully complete various work indicators throughout the year, and realize the company's development and then go to a new level, which is inseparable from the participation and hard work of female employees. The company has always attached great importance to and cares about the work of female employees. It is hoped that the majority of female employees will continue to carry forward the spirit of self -improvement, hard work, and pioneering innovation, and vigorously promote the spirit of self -esteem, self -improvement, self -confidence, and self -reliance. Quality, live up to the company's ardent hope, actively practice the core values of "integrity, responsibility, innovation, and dedication", strive to surpass and pursue excellence, create more brilliant performance in their respective jobs, and do it for the company's continuous and rapid development. New and greater contributions!

The application field of ring -shaped bus is widely used, involving various industries. Such as: transformer industry, textile industry, electronics industry, etc. Various electric motors, various large and small transformers proof, fluorescent lightfill, TV, refrigerators and other electronics industries must be used in electronics industries. Not only that, the medium and Zhou, electronic ignition machines, high -voltage coils, inductor coils, and speakers, headphones and microphones for the radio machines, and the horn, earphones, and microphones are not opened. In the textile industry, various yarns that are suitable for textile machines are generally used in the textile industry. And these gauze need to go around. Three -in -one -controlling mother arrangement machine processing machine 10 major brands

The fast start and accurate parking requires the rapid acceleration to the set speed when the winding operation is required to improve the winding efficiency and the operation of artificial lines. Generally, small diameter motor rim winding speed is about 600 rpm/minute, diameter diameter, diameter, diameter, and diameter The larger the speed, the lower the speed; the precise parking function is a function that the motor bus is required. Multiple winding coils need to cross the wire at the same position at each time.