What are the mother row bending machines (10 brands of the Fujian copper row automatic bending machine)

Some manufacturers' unreasonable localities will have many congenital shortcomings and unreasonable localities, and these local local instructions or equipment samples cannot be understood clearly, so they need to choose regular bus processing machine manufacturers.

Accelerating time: The stronger the motor is, the more powerful the bronze row processing machine can reach the speed that the driver wants within a shorter and shortest time. What are the mother row bending machines?

When making the homeline, the curved power should be selected according to the different size of the parent specifications and uses according to the "bending power". Try to use small bending power as much as possible without the use. Due to large bending power, it will damage the bus when making the bus.

What are the different relays with magnetic braking characteristics. The differential relay of the transformer is a set of brake coils based on the speed saturation variables. The short -circuit current when external faults is used to achieve braking, which increases the starting current of the relay with the increase in braking current. It It can reliably avoid the unbalanced current when the transformer is short -circuited, and increase the sensitivity of the internal failure of the transformer. Therefore, relay's

CNC busbar machine refers to a product made of copper and aluminum materials with a high -conductive rate, which is used to transmit electrical energy and have products with aggregation and distribution of electricity. The total wire of the power station or the transformation station conveyor power can be used. Through it, the electric energy output from the generator, a transformer or a rectifier is transported to each user or other substations. Therefore, the use of the bus is very large, and it must be produced with professional production equipment.

In short, the step -step -steps of the bus is to determine the real causes and faults as soon as possible according to the fault phenomenon. These fault treatment methods are not strictly used in actual use. It may also be carried out at the same time. Its effect depends on the experience of maintenance technicians and its depth of understanding and grasp of system principles and structures. This is not only the quality that the maintenance personnel must have, but at the same time, the maintenance personnel have made high requirements. It requires the CNC parent maintenance personnel to be familiar with the structure and design ideas of the parent machine. Quickly find the cause of the fault and judge the fault position. In addition, in order to perform on -site surveying and mapping for certain circuits and parts during maintenance, as a senior maintenance personnel, they should also have a certain ability to draw engineering drawings. What are the parent line machine maintenance?

The bending unit is a closed structure and adopts a horizontal processing method to ensure the structure strength of the bending unit. After changing the bending mold, you can complete the processing of the workpiece.